NuVISION-MAX
The NuVISION-MAX is the high efficiency version of our gamma cameras. As the standard NuVISION, the camera combines several functions in one device. It can localize hotspots from a distance, identify the corresponding radionuclides and estimate the doserate contribution of every hotspot seperately.
| Brand | |
|---|---|
| Model | NuVISION-MAX |
NuVISION-MAX
Portable spectrometric gamma imaging system
The NuVISION-MAX is the high efficiency version of our gamma cameras. As the standard NuVISION, the camera combines several functions in one device. It can localize hotspots from a distance, identify the
corresponding radionuclides and estimate the doserate contribution of every hotspot seperately. The high efficiency performance reduces the acquisition time and allows to image hot spots of lower activities
in particular at high energies. The NuVISION-MAX incorporates a large volume CZT-detectorsystem, twice as large as the regular NuVISION. Its unique design allows both coded mask AND Compton
imaging. This combination provides a full 360° FOV (Compton) while having a great 3.5° resolution (coded mask). The high processing speed allows to perform real-time imaging and tracking mobile sources.
NuVISION-MAX is the high efficiency version of NUVIATech Instruments’ gamma imagers. Its large CZT detector system allows to minimize acquisition time in particular at high energies. The 19.2 cm³ CZT detector allows to reach unprecendented energy resolution of 1.5% at 662 keV. Each gamma event is localised on a 128 × 128 pixel array. The resulting spectral image is reconstructed in real time to identify isotopes and localise activity.
Angular Resolution:
- 3° for a 45 degree field of view using the coded aperture
- 15° for a 360 degree field of view using the Compton imaging
The system is sensitive enough to localize a 250 nSv/h Co-60 source in natural background in less than 60 seconds. The strength of the system is its spectrometric capability for the detection of low energy peaks from isotopes which may otherwise be masked by other sources, legitimate or not combined with high detection efficiencies at high energies. The system is able to localise the source of interest and isolate it from the background whether it is a NORM, medical or industrial source. With a weight of only 3.3 kg the NuVISION can be used as an handheld device in dynamic mode.
Features
- Higher efficiency resulting in reduced acquisition time and improved sensitivity
- Real-time imaging
- High resolution (coded mask) and 360° field of view (compton)
- Wide energy range for spectrometry from 20—1400 keV:
Radioisotopes from 241Am to 60Co - H*(10) dose rate estimation per hotspot
- Dose rate in specified distance to source can be calculated
- User-friendly, portable device
Specifications
- Size
- 10cm x 10cm x 24cm (HxWxD)
- 23cm x 42cm x 30cm with bumper, handle tablet
- Weight – 3.3 kg (5.1 kg with bumper, handle, and tablet)
- Detection Vol. – 19.2 cm³
- Ingress Point – IP65
- Angular Res.
- 3.5° Coded Apert.
- 15° Compton
- Field of view
- 45° Coded Apert.
- 360° Compton
- Battery operation – Yes (15V/6.5W)
- Energy Range – 20-1400 keV
- Dose Rate Range (at detector)
- Max. 15 mSv/h (Identification & DR estimation)
- Max. 50 mSv/h (Localisation)
- Sensitivity 137Cs
- 50 nSv/h < ~90s (localisation + identification)
- Sensitivity 57Co
- 50nSv/h ~ 5s
- Sensitivity 60Co
- 150 nSv/h: ca.120s localisation
- 250 nSv/h: ca 60s localisation
- Energy Res.
- 2.5% at 122 keV
- 1.5% at 662 keV
Measurements
- Isotope Cs-137 / c.s-1/ (µSv/h) Approx. 430
- Isotope Co-60 / c.s-1/ (µSv/h) Approx. 280
Requirements
- Battery operation – Yes (15V/6.5W)
- Energy Range – 20-1400 keV
