-
The edge test device according to IEC 62220-1 for determination of Modulation Transfer Function that consists ofa tungsten plate fixed on a lead plate. -
The compact and easy to use phantom designed to invoke a response of automatic-exposure. Follows the Center for Devices and Radiological Health (CDRH) specifications of a chest phantom and AAPM recommendations from Report No. 31 ”Standardized Methods for Measuring Diagnostic X-Ray Exposure”.
-
The compact and easy to use phantom for performance evaluation of fluoroscopic systems according to Center for Devices and Radiological Health (CDRH) specifications. It also meets recommendations of AAPM Report No. 60 “Instrumentation Requirements of Diagnostic Radiological Physics”. It is optimized for both under- and over-table fluoroscopic tubes. -
The radiopaque ruler in the image provides a permanent reference of image size. It can be used to check the accuracy and position of the light field for quality control and adjustment as well as be included during x-ray procedures, leaving a clear measurement right on the x-ray image itself. -
The Pro-AlphaG phantom is a simple tool to check geometry of the R/F system: collimation / beam alignment and position and size of the effective radiation field. -
This device readily indicates a 1% or 2% misalignment at a 1 m focal-film distance (FFD), but it can be used at any FFD. It consists of a flat 20 x 25 cm plate with a 14 x 18 cm pattern etched on its surface. It can also be used to check fluoroscopy alignment and collimation.
-
The Pro-Alpha phantom can be used for carrying out acceptance and constancy tests of conventional radiography X-Ray units.
-
The phantom for evaluation of imaging performance of radiographic systems. It allows wide-range low-contrast and high-contrast resolution evaluation and sensitometric measurements. Available in standard layout plus any custom configuration. -
The phantom for evaluation of imaging performance of fluoroscopic systems. It allows brightness and contrast adjustments, circular geometry check (scanning linearity) plus wide-range low-contrast and high-contrast resolution evaluation. Available in two standard layouts plus any custom configuration. -
The Pro-RF BacisTool phantom is a compact general radiography image quality testing phantom. -
The Contrast-Detail (CD) phantom makes it possible to quantify both detail and contrast as observed by the radiologist. It can be used within the entire range of radiography diagnostic imaging systems, such as fluoroscopy and angiography. It has 405 holes that generate subtle changes in contrast. -
The phantom for acceptance and constancy testing of Cone-Beam CT / Volume Tomography (DVT) in fluoroscopy according to DIN 6868-150.
