Protec III Syringe Shield

The Pro-Tec™ III Syringe Shield is designed to reduce hand exposure in clinicians preparing and administering radiopharmaceuticals. With its lightweight, sleek design, this syringe shield is easy to use.

The barrel of the shield is constructed of 2 mm thick tungsten that will reduce radiation exposure from Tc-99m by more than 99% attenuation for Tc-99m tested with TLD chips. A 5.05 density lead glass window provides protection and optimal visibility.

A white reflective surface on the shield interior improves viewing of the syringe’s markings and fluid content. Polymer encasement* and beveled edge around the lead glass helps guard against scratching or breaking. The quick release, Safe-T-Lock is designed to facilitate minimal handling, thereby reducing hand exposure. Upon insertion, the Safe-T-Lock grips and securely locks the syringe into place. Disposing of used syringes is easy; invert the syringe shield over a sharps container, press the release button and the syringe freely disengages.

Pro-Tec™ III Syringe Shields accommodate the standard sized 1 cc, 3 cc, 5 cc, and 10 cc syringes.

Features

Upon insertion, Safe-T-Lock automatically secures syringe; release with the push of a button.

2 mm thick Tungsten shielding

5.05 density lead glass window

Safe-T-Lock firmly secures syringe to avoid rotating

Safe-T-Lock design reduces exposure with faster handling

Unobstructed visibility to tip of syringe

Replacing scratched or broken glass is simple no gluing required

Easily sanitized with alcohol wipes

Pro-Tec™ III Syringe Shields accommodate the standard sized 1 cc, 3 cc, 5 cc, and 10 cc syringes.

Pro-Tec™ III Syringe Shields:

CAP007-723 Syringe Shield, 1 cc (BD luer lock)

CAP007-734 Syringe Shield, 1 cc (press fit)

CAP007-755 Syringe Shield, 2.5 cc (HSW)*

CAP007-735 Syringe Shield, 3 cc

CAP007-736 Syringe Shield, 5 cc

CAP007-738 Syringe Shield, 10 cc

Syringe shields are not universal and may not fit all syringe manufacturers. Please check dimensions to assure proper fit.