Dose Calibrator Maintenance
At InMed, we have trained staff capable of servicing your dose calibrator in accordance with Australian guidelines.
The following services is available for both Biodex and Capintec dose calibrators:
- Calibration
- Linearity Testing
- Repair
With each service, you will be provided a report on your system as well as a certificate (for calibration).
Repair and Troubleshooting
Repair Needed? Log a Service Call with Us.
Fill out a Log a Service Request Form if you wish to calibrate your instrument.
Troubleshooting
If you have any trouble with your RaySafe instrument, we are ready to assist you. In some cases, however, it might be sufficient to check the following list of potential error sources to easily detect and solve the issue on your own.
Hardware Check
- check the battery condition
- check if all add-ons to your system (e.g. detector, cable) are properly connected
- connect another add-on of the same type and try again
Measurement Check
- check if the measurement was made within the specification of your instrument
- check and, if necessary, correct/adapt the settings
- reset the instrument settings and try again
